Class AIInputVal

Select input value to set

Inputs marked 'hold' must be set back to zero after some time. This can be done either by use of the Time field or by sending a later packet with Value = 0.

E.g. Set Time to 10 when issuing a CS_CHUP - hold shift up lever for 0.1 sec.

E.g. Set Time to 50 when issuing a CS_HORN - sound horn for 0.5 sec.

Time to hold (optional, hundredths of a second)

If the Time value is set, that input will return to default after that time. This is probably most useful for CS_CHUP / CS_CHDN / CS_FLASH / CS_HORN inputs. If you don't use Time then you should send another packet to zero the input.

Value to set