Brake
Hold shift down lever
Hold shift up lever
Clutch
Extra light: 1 toggle / 2 switch off / 3 switch on
Hold flash
Front fog light: 1 toggle / 2 switch off / 3 switch on
Rear fog light: 1 toggle / 2 switch off / 3 switch on
Gear for shifter (leave at 255 for sequential control)
Handbrake
Headlights: 1: off / 2: side / 3: low / 4: high
Hold horn - 1 to 5
Ignition: 1 toggle / 2 switch off / 3 switch on
1: cancel / 2: left / 3: right / 4: hazard
Look: 0: none / 4: left / 5: left+ / 6: right / 7: right+
Steer: 1 hard left / 32768 centre / 65535 hard right
Pit speed limiter: 1 toggle / 2 switch off / 3 switch on
Start or stop sending regular IS_AII packets Time = time interval in hundredths of a second (0 : stop)
Send an IS_AII (AI Info) packet
Set help flags.
Value can be any combination of
Default value for an AI driver is PIF_AUTOCLUTCH only. If you set PIF_AUTOGEARS you don't need to set PIF_AUTOCLUTCH.
Siren
Stop control
The AI driver will stop the car.
Traction control disable: 1 toggle / 2 switch off / 3 switch on
Throttle
Inputs marked 'hold' must be set back to zero after some time. This can be done either by use of the Time field or by sending a later packet with Value = 0.
E.g. Set Time to 10 when issuing a CS_CHUP - hold shift up lever for 0.1 sec.
E.g. Set Time to 50 when issuing a CS_HORN - sound horn for 0.5 sec.